China Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler Manufacturer and Supplier

Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler

Product Detail

Product Tags

Feedback (2)

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for Refrigeration Equipment, Monoblock Unit, Refrigeration Evaporator Unit, Our professional technological team will be wholeheartedly at your services. We sincerely welcome you to definitely take a look at our website and enterprise and send out us your inquiry.

Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler Detail:

Company Profile

2121

Product Description

DD40 40㎡ cold storage evaporator

Ref.Capacity (kw)

Cooling Area (m²)

Qty

Diameter (mm)

Φ400

Air Volume (m3/h)

2×3500

Pressure (Pa)

118

Power (W)

2×190

Oil (kw)

2.83

Catchment Tray (kw)

0.8

Voltage (V)

220/380

Installation Size (mm)

1520*600*560

Installation size data

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

E1(mm)

E2(mm)

E3(mm)

F(mm)

Inlet tube (φmm)

Back trachea (φmm)

Drain pipe

1560

530

580

380

1280

Introduction

Whether the air evaporator is properly installed will directly affect the performance of the entire system and the cooling and heat preservation performance of the cold storage. Therefore, the following instructions should be carefully referred to when installing:

1.During installation, ensure unobstructed air flow, uniform air supply in the cold storage, and convenient maintenance. The fan range of the air cooler is 7 meters. When installing, pay attention to the uniform temperature of cold storage longer than 7 meters.

2.The exhaust direction of the fan should be towards the door as much as possible, and the suction side should avoid the door.

3.The configuration of the liquid supply pipe should ensure sufficient liquid supply and no flash gas before the expansion valve; the configuration of the gas return pipe should ensure that the oil return is smooth and the pressure loss does not exceed 2PSIG. After the air return pipe exits the evaporator, an oil return bend should be added when ascending, and the diameter of the ascending section should be reduced.

Product detail pictures:

Related Product Guide:

Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler , The product will supply to all over the world, such as: Algeria, Brunei, Singapore, Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.

Refrigeration Evaporator

In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.

By Olive from Lebanon - 2018.12.14 15:26

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!

By Hedda from Curacao - 2018.09.12 17:18

Write your message here and send it to us