China Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler Manufacturer and Supplier

Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler

Product Detail

Product Tags

Feedback (2)

abide by the contract", conforms to the market requirement, joins during the market competition by its superior quality also as provides extra comprehensive and exceptional service for consumers to let them turn into significant winner. The pursue of the business, is definitely the clients' gratification for Cold Storage Project, Cold Cooling, Mini Cold Storage, With the tenet of "faith-based, customer first", we welcome clients to call or e-mail us for cooperation.

Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler Detail:

Company Profile

2121

Product Description

DD40 40㎡ cold storage evaporator

Ref.Capacity (kw)

Cooling Area (m²)

Qty

Diameter (mm)

Φ400

Air Volume (m3/h)

2×3500

Pressure (Pa)

118

Power (W)

2×190

Oil (kw)

2.83

Catchment Tray (kw)

0.8

Voltage (V)

220/380

Installation Size (mm)

1520*600*560

Installation size data

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

E1(mm)

E2(mm)

E3(mm)

F(mm)

Inlet tube (φmm)

Back trachea (φmm)

Drain pipe

1560

530

580

380

1280

Introduction

Whether the air evaporator is properly installed will directly affect the performance of the entire system and the cooling and heat preservation performance of the cold storage. Therefore, the following instructions should be carefully referred to when installing:

1.During installation, ensure unobstructed air flow, uniform air supply in the cold storage, and convenient maintenance. The fan range of the air cooler is 7 meters. When installing, pay attention to the uniform temperature of cold storage longer than 7 meters.

2.The exhaust direction of the fan should be towards the door as much as possible, and the suction side should avoid the door.

3.The configuration of the liquid supply pipe should ensure sufficient liquid supply and no flash gas before the expansion valve; the configuration of the gas return pipe should ensure that the oil return is smooth and the pressure loss does not exceed 2PSIG. After the air return pipe exits the evaporator, an oil return bend should be added when ascending, and the diameter of the ascending section should be reduced.

Product detail pictures:

Related Product Guide:

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Factory wholesale Refrigeration Evaporator - DD40 40㎡ cold storage medium temperature evaporator – Cooler , The product will supply to all over the world, such as: San Diego, Hanover, Palestine, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.

Refrigeration Evaporator