China Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler Manufacturer and Supplier

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler

Product Detail

Product Tags

Feedback (2)

We stick with the theory of "quality first, company first, steady improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for Commercial Refrigeration Condensing Units, Aluminum Sandwich Panel, Cold Storage Box, When you've got any remarks about our firm or merchandise, please come to feel no cost to call us, your coming mail will likely be really appreciated.

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler Detail:

Company Profile

2121

Product Description

DJ100 100㎡ cold storage evaporator

Ref.Capacity (kw)

18.5

Cooling Area (m²)

100

Qty

Diameter (mm)

Φ500

Air Volume (m3/h)

4×6000

Pressure (Pa)

167

Power (W)

4×550

Oil (kw)

Catchment Tray (kw)

2.2

Voltage (V)

220/380

Installation Size (mm)

3120*650*660

Installation size data

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

E1(mm)

E2(mm)

E3(mm)

F(mm)

Inlet tube (φmm)

Back trachea (φmm)

Drain pipe

3110

690

680

460

2830

700

Maintenance work

1. Leak detection of the evaporator is often carried out. Leakage is a common failure phenomenon of evaporators, and you should pay attention to frequent leak detection during use.

When the ammonia evaporator leaks, it has a pungent odor, and there is no frost at the leaking point. Phenolphthalein test paper can be used to check the leak, because ammonia is alkaline, it turns red when it meets phenolphthalein test paper.When you look at it, it is usually a leak point where there is no frost in the evaporator. You can also use soapy water to find the leak at the leak.

2. Check the frosting condition of the evaporator frequently. When the frost layer is too thick, it should be defrosted in time. When the frost is abnormal, it may be caused by blockage, and the cause should be found and eliminated in time.

3. When the evaporator is out of service for a long time, it is advisable to bump the refrigerant into the accumulator or condenser and keep the pressure of the evaporator at about 0.05MPa (gauge pressure). If it is the evaporator in the salt pool, it needs to be flushed with tap water. After flushing, fill the pool with tap water.

Product detail pictures:

Related Product Guide:

We know that we only thrive if we can guarantee our combined price competiveness and quality advantageous at the same time for Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler , The product will supply to all over the world, such as: Lebanon, UK, Holland, We've been adhering to the philosophy of "attracting customers with the best items and excellent service". We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

Refrigeration Evaporator