Welcome to our websites!

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler


Product Detail

Product Tags

Related Video

Feedback (2)

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Mini Condensing Unit, Sandwich Panel Roof, Chiller Room, Teamwork is encouraged at all levels with regular campaigns. Our research team experiments on various developments in the industry for improvement in the products.
Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler Detail:

Company Profile

2121

Product Description

2

DJ100 100㎡ cold storage evaporator

Ref.Capacity (kw)

18.5

Cooling Area (m²)

100

Qty

4

Diameter (mm)

Φ500

Air Volume (m3/h)

4×6000

Pressure (Pa)

167

Power (W)

4×550

Oil  (kw)

10

Catchment Tray (kw)

2.2

Voltage (V)

220/380

Installation Size (mm)

3120*650*660

Installation size data

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

E1(mm)

E2(mm)

E3(mm)

F(mm)

Inlet tube (φmm)

Back trachea (φmm)

Drain pipe

3110

690

680

460

2830

700

700

700

 

19

38

 

1

Maintenance work

1. Leak detection of the evaporator is often carried out. Leakage is a common failure phenomenon of evaporators, and you should pay attention to frequent leak detection during use.

When the ammonia evaporator leaks, it has a pungent odor, and there is no frost at the leaking point. Phenolphthalein test paper can be used to check the leak, because ammonia is alkaline, it turns red when it meets phenolphthalein test paper.When you look at it, it is usually a leak point where there is no frost in the evaporator. You can also use soapy water to find the leak at the leak.

2. Check the frosting condition of the evaporator frequently. When the frost layer is too thick, it should be defrosted in time. When the frost is abnormal, it may be caused by blockage, and the cause should be found and eliminated in time.

3. When the evaporator is out of service for a long time, it is advisable to bump the refrigerant into the accumulator or condenser and keep the pressure of the evaporator at about 0.05MPa (gauge pressure). If it is the evaporator in the salt pool, it needs to be flushed with tap water. After flushing, fill the pool with tap water.

3


Product detail pictures:

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator –  Cooler detail pictures

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator –  Cooler detail pictures

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator –  Cooler detail pictures

Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator –  Cooler detail pictures


Related Product Guide:

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction for Factory wholesale Refrigeration Evaporator - DJ100 100㎡ cold storage low temperature evaporator – Cooler , The product will supply to all over the world, such as: Romania, Juventus, America, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
  • Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
    5 Stars By Riva from Cannes - 2017.02.18 15:54
    This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Olivia from Singapore - 2017.02.28 14:19
    Write your message here and send it to us